Platform trailers are designed to perform in a variety of operating conditions on the highway carrying diverse workloads and handling the demands of challenging loading conditions. This line has the ability to transport a variety of general commodity loads and specialty construction equipment with strong trailer construction and efficient design works together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Low Deck Height
Safety
Low Center of Gravity – Warning Decals
Value
Resale Value - Owner/Operator's Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training – Factory Written Warranty
Specifications:
Capacity: 70,000 lbs distributed in 48’, 50,000 lbs concentrated in 10’; GAWR & Tire rating determine legal loads
Overall dimensions: 48’ OAL, 9’ Upper deck, 30-1”lower and 8’-11” Rear
Gooseneck: Full width, floored with 1 1/8” apitong
Swing Clearance: 82”
Upper Coupler: 50” king pin height, 2” pin, and 18” setting.
Landing gear: 2-Speed landing gear with roadside crank handle
Deck heights, loaded: 18” at rated capacity (6” ground clearance) rear 42” at rated capacity
Beams: Four beam design, 130,000-psi yield flanges and 80,000 psi yield web; 12” deep main beams
Crossmembers: 18” centers, 4” Jr I beams
Stake pockets: Stake pockets on 36” centers
Floor: 1 5/16” Apitong with screws on every cross member; 1 1/8” on rear deck
Suspension: Ridewell Model 240 Air Ride,50” spread( no dump or lift axles)
Air Controls: Automatic leveling air valve
Axles: Two axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 16½” X 7” Air; parking brakes on both axles
ABS: 2S-1M rear axle
Slack Adjusters: Automatic slack adjusters
Wheels: Steel disc wheels 8.25 X 22.5
Tires: OEM, 255/70R22.5, 16PR (Low Profile) radial tires
Mudflaps: Black anti-spray with Kalyn Siebert logo
Finishing (Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint; Aluminum diamond plate at rear of upper deck and rear lights. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED and additional lighting available
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 13,250 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty; One-year on remainder.
Options:
53’ deck length
Bulkhead 48” aluminum or steel
Swing clearance
Two place kingpins(drop in)
Tie downs D-rings
Aluminum wheels-polished or mill finished
Hubodometer
Ratchet winches welded on siderail between pockets
Ratchet winches recessed in side rail
Crossmembers on 12” centers
Flag holders
Third axle flip or fixed
Parking brakes
Spare tire and wheel
LED Lights
Third tail light package
Pressure equalization system
Dust shields
Chain tie downs-pop up type
Paint-color-contact RSM
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
