Platform trailers are designed to perform in a variety of operating conditions on the highway carrying diverse workloads and handling the demands of challenging loading conditions .This line has the ability to transport a variety of general commodity loads and specialty construction equipment with self supporting loads supported and blocked in two point position when open. Strong construction and efficient design work together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Low Deck Height
Safety
Low Center of Gravity – Warning Decals
Value
Resale Value - Owner/Operator's Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training – Factory Written Warranty
Specifications:
Capacity: 75,000 lbs distributed closed; 50,000 lbs blocked 2-point load when open; GAWR & tire rating determine legal loads
Overall nominal dimensions: 48’-0” length, Gooseneck 10’-0”, main deck 29’0”, rear deck 9’-0”. Load space 29’ 0” for main deck closed, 52’ 0” open. Available deck space for 2 point load
Gooseneck: Full width, fixed with 1 1/8” apitong
Swing Clearance: 81”
Upper Coupler: 49” king pin height, 2” pin, and 15” setting.
Landing gear: 2-Speed landing gear with roadside crank handle
Stake pockets: Stake pockets in side rail on 32” centers
Flex track: Track between main beams to enclose and provide protected travel of air and electrical lines during extension of trailer
Stops: Air operated for extendable length with stops approximately three @60”, 2@48”. Track carrier for air and electrical lines allow extension /retraction without disconnecting/reconnecting lines
Main Deck height loaded: 20” at rated capacity. 6”ground clearance; 47”rear
Beams: Front deck has main beams that are 14” deep and side rails that are 11” deep. Rear deck beams are 11 ¼” deep. All beams have 100,000 psi yield flanges and 80,000 psi yield webs
Cross members: On main deck, 4” Junior I beams on 12” centers
Floor: 1 5/16” Apitong on main deck with center open; 1 1/8” Apitong on gooseneck; 1 1/8” on center of rear deck with floor screws every cross member.
Tie Downs: Lightening square holes™ in both main beams and side rail serve as tie downs. Gooseneck and rear deck have double keyhole slots on side rails only.
Flag holders: At rear of gooseneck each side, front of deck, and in rear bolster
Suspension: Ridewell Model 240 Air Ride, 50” spread, none of the axles are built as lift axles; optional lift axle on rear
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard; located in roadside bolster
Axles: Two axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 16½” X 7” Air; with parking brakes both axles
ABS: 2S-1M on rear axle
Slack Adjusters Automatic slack adjusters
Wheels: Steel disc wheels 8.25 X 22.5
Tires: OEM, 255/70R22.5, 16PR (Low Profile) radial tires
Mudflaps: Black anti-spray with Kalyn Siebert logo
Finishing (Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED and additional lighting available
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 20,000 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty; One-year on remainder.
Options:
Additional deck length
Swing clearance
Two place kingpins (drop in)
Flip gooseneck (extension)
60” axle spacing
9’-0” width
Additional tie downs D-rings
Swinging side brackets
Aluminum wheels-polished or mill finished
Third axle flip
Lift axle at rear
Removable boards for brackets
Parking brakes
Spare tire and wheel
Lugs, air and electrical for third axle flip
ABS 4S-2M
Paint-color-contact RSM
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
