Drop Platform 80K Trailer

Platform trailers are designed to perform in a variety of operating conditions on the highway carrying diverse workloads and handling the demands of challenging loading conditions.  This line has the ability to transport a variety of general commodity loads and specialty construction equipment.  Strong trailer construction and efficient design works together for the safest and most trusted name on the job. 

Quality

Design – Construction – Craftsmanship - On-Time Delivery

Performance

Service Life - Light Tare Weight – Low Deck Height

Safety

Low Center of Gravity – Warning Decals

Value

Resale Value - Owner/Operator's Cost - Factory Tested

Customer Support

Dealer Support - Technical Support - Product Training – Factory Written Warranty

Specifications:

Capacity: 80,000 lbs distributed in 48’, 60,000 lbs concentrated in 10’. GAWR & tire rating determine legal loads

Overall dimensions: 48’ OAL, 10’ Upper deck, 38’ lower deck

Gooseneck: Full width, floored with 1 1/8” apitong

Swing Clearance: 84”

Upper Coupler: 49” king pin height, 2” pin, and 18” setting.

Landing gear: 2-Speed landing gear with roadside crank handle

Deck heights, loaded: 36” at rated capacity at rear,61”upper deck

Beams: Four beam design, 130,000-psi yield flanges and 80,000 psi yield web; 24” main beam and 6” side channels.

Crossmembers: 16” centers, 4” Jr I beams

Rub rail, stake pockets: 2 x 5/16” rub rail, 24” centers for stake pockets, and single pipe spools as standard

Winch Track: Outside channel both sides, upper and lower are notched for winches.

Floor: 1 1/8” Apitong with screws on every cross member. 

Suspension: Ridewell Model 240 Air Ride, electric dump on rear axle,121” axle spread

Air Controls: Automatic leveling air valve with electric dump on rear axle

Axles: Two axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity

Hubs: 8 stud, hub piloted, long studs, steel hub.

Drums: Cast drum

Seals: Oil

Brakes: 12 ¼” X 7 ½” Air parking brakes on both axles

ABS: 4S-2M both axles

Slack Adjusters: Automatic slack adjusters

Wheels: Steel disc wheels 6.75 X 17.5

Tires: OEM, 235/70R17.5, 16PR (Low Profile) radial tires

Mudflaps: Black anti-spray with Kalyn Siebert logo

Finishing (Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint; Aluminum diamond plate at rear of upper deck and rear lights. Air, electrical and hydraulic lines installed after painting is completed

Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED and additional lighting available

Conspicuity Tape: Discontinuous on sides

Manual: One operator manual per order will be provided. Parts manual available as option

Weight: 12,600 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.

Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty; One-year on remainder.

Options:

53’ deck length (11’ upper 42’ lower)

Bulkhead 48” aluminum or steel

Swing clearance

Two place kingpins (drop in)

Tie downs D-rings

Aluminum wheels-polished or mill finished

Hubodometer

Ratchet winches-sliding type

Ratchet winches welded underneath

Ratchet winches welded on siderail between pockets

Ratchet winches recessed in side rail

Crossmembers on 12” centers

Flag holders

Sliding rear axle

Parking brakes

Spare tire and wheel

LED Lights

Third tail light package

Pressure equalization system

Double pipe spools

Chain tie downs-pop up type

Steel slider track

Aluminum slider track

Nylon straps

Tool box steel or aluminum

Twist locks ISO 1-40’,2-20’

255/70R22.5 Tires (Deck height 40”)

Paint-color-contact RSM