KSHRG is designed to perform in a variety of operating conditions, both on and off road carrying diverse workloads and handling the demands of challenging loading conditions. The five position Gooseneck height controls, strong trailer construction and efficient design works together for the safest and most trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Adjustable Gooseneck – Low Deck Weight
Safety
Low Center of Gravity – Self Locking Latch – Warning Decals
Value
Resale Value - Owner/Operator's Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training – Factory Written Warranty
Specifications:
Capacity: 102,000 lbs concentrated in 12’.GAWR & Tire rating determine legal loads
Deck Length (Load space): 25’ standard
Gooseneck: Adjustable 5 position ride height with Kalyn Siebert “Posi-Latch”. At highest position, approximate ground clearance at front of main deck is 32”
Swing Clearance: 96”
Upper Coupler: 50” king pin height, 2” pin, and 15” setting.
Hydraulics: PTO powered as standard (15 GPM,28 PSI),two 9”x 16” main & one 4” x 10” lift arm cylinders
Main Deck height: 20” at rated capacity.6” ground clearance
Beams: Four beam design, 130,000-psi yield flanges and 80,000 psi yield web. All 4 beams are the same height.
Crossmembers: 8” I –Beam 24” centers
Floor: 1 ¾” Apitong with bridge clips and carriage bolts on every other cross member. Center open.
Outriggers: Clips only - Quantity varies with deck length. Option for additional clips and outriggers
D-rings: 4 pair (bent) on siderail. Double key hole slots - one on each bolster and rear of deck.
Tool Tray: Expanded metal tool tray at front of lower deck, approximately 6’ long.
Boom Trough: First two cross members at rear lowered. No metal rear boom trough tray
Ramps: No front ramps or bridge to rear deck ramps as standard, 10 ¾” drop from top of tapered ramp to ground. Optional front load ramp &.Bridge ramps
Lugs: Not included as standard
Suspension: Ridewell Model 240 Air Ride, 55” spread, none of the axles are built as lift axles. Optional lift axle on rear
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard.
Axles: Three axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 16½” X 7” Air. No parking brakes as standard.
ABS: None
Slack Adjusters: Automatic slack adjusters
Wheels: Steel disc wheels 8.25 X 22.5
Tires: OEM, 255/70R22.5, 16PR (Low Profile) radial tires
Mudflaps: Black anti-spray with Kalyn Siebert logo
Finishing(Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED and additional lighting available
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 18,900 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty. One-year on remainder.
Options:
Self contained power package in base of gooseneck (13 HP Honda)
Additional deck length
Swing clearance
Two place kingpins(drop in)
Flip gooseneck (extension)
60” axle spacing
9’-0” width
Drop siderails
Additional tie downs D-rings
Swinging side brackets
Expanded metal under crossmembers
Cut off valve with chains (for lift axle)
Aluminum wheels-polished or mill finished
ABS 4S-2M
Paint-color-contact RSM
Fourth axle flip
Spreader bar for 14’ spread
Lift axle at rear
Lugs, air & electrical at rear
Wheel covers
Removable wheel covers
Front loading ramps
Rear loading ramps(beavertail)36”
Spring assist ramps at rear
Hydraulic loading ramps(Electric /hydraulic)
Air lock pin at deck
Full apitong (1 ¾” deck)
Removable boards for brackets
Front bolster welded or removable-bolt on
Boom trough removable cover
Two cleats on Bolster
Parking brakes
Spare tire and wheel
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
