KSHRG is designed to perform in a variety of operating conditions, both on and off road carrying diverse workloads and handling the demands of challenging loading conditions. The five position Gooseneck height controls, strong trailer construction and efficient design works together to for the safest most and trusted name on the job.
Quality
Design – Construction – Craftsmanship - On-Time Delivery
Performance
Service Life - Light Tare Weight – Adjustable Gooseneck – Low Deck Weight
Safety
Low Center of Gravity – Self Locking Latch – Warning Decals
Value
Resale Value - Owner/Operator's Cost - Factory Tested
Customer Support
Dealer Support - Technical Support - Product Training – Factory Written Warranty
Specifications: Capacity: 70,000 lbs distributed closed; 50,000 lbs blocked 2-point load when open.
GAWR & tire rating determine legal loads.
Overall nominal dimensions: 50’ 6” length. Gooseneck 11’ 5”, main deck 29’ 8” and rear deck 9’ 5”. 30’ 0” for main deck closed, 51’ 1” open. Available deck space for 2 point load 42’.
Gooseneck: Adjustable 5 position ride height with Kalyn Siebert “Posi-Latch”.
Swing Clearance: 84”
Upper Coupler: 50” king pin height, 2” pin, and 15” setting.
Hydraulics: PTO powered as standard (15 GPM,28 PSI),two 7”x 12” main & one 4” x 10” lift arm cylinders
Flex track: Track between main beams to enclose and provide protected travel of air and electrical lines during extension of trailer
Stops: Air operated for extendable length with stops approximately three @60”,2@48”.Track carrier for air and electrical lines allow extension /retraction without disconnecting/reconnecting lines
Main Deck height: 21” at rated capacity.6” ground clearance
Beams: Front deck has main beams that are 14 7/8” deep and side rails that are 11 1/8” deep. Rear deck beams are 11 ¼” deep. All beams have 100,000 psi yield flanges and 80,000 psi yield webs minimum.
Crossmembers: On main deck, 8” formed channels & 4” Junior I beams alternating on 12” centers.
Floor: Main deck 1 ½” Apitong with steel center. 1 1/8” Apitong on gooseneck; 1 1/8” on rear deck with floor screws every cross member.
Outriggers: Clips only - Quantity varies with deck length. Option for additional clips and outriggers
Tie Downs: Lightening square holes ™ in both main beams and side rail serve as tie downs. Gooseneck and rear deck have tie down holes on side rails only.
Tool Tray: None
Front Deck Ramps: Tapered with approximately 11” drop to ground.
Suspension: Ridewell Model 240 Air Ride, 50” spread, none of the axles are built as lift axles. Optional lift axle on rear
Air Controls: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure; Manual dump valve standard.
Flag Holders: At rear of gooseneck each side, front of deck and in rear bolster
Axles: Three axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
Hubs: 10 stud, hub piloted, long studs, steel hub.
Drums: Cast drum
Seals: Oil
Brakes: 16½” X 7” Air. Parking brakes on rear axle only.
ABS: 2S-1M on rear axle
Slack Adjusters: Automatic slack adjusters
Wheels: Steel disc wheels 8.25 X 22.5
Tires: OEM, 255/70R22.5, 16PR (Low Profile) radial tires
Mudflaps: Black anti-spray with Kalyn Siebert logo
Finishing(Paint and trim): Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed
Lights & Electrical: Sealed beam with mid turn signal, 12 volt. 7-way plug.LED and additional lighting available
Flex Track: Flex track between main beams to enclose and to provide travel for air and electrical lines.
Conspicuity Tape: Discontinuous on sides
Manual: One operator manual per order will be provided. Parts manual available as option
Weight: 23,000 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Warranty: Backed by five-year prorated frame warranty and three –year prorated paint warranty. One-year on remainder.
Options:
Self contained power package in base of gooseneck (13 HP Honda)
Additional deck length
Swing clearance
Two place kingpins (drop in)
Flip gooseneck (extension)
60” axle spacing
9’-0” width
Additional tie downs D-rings
Swinging side brackets
Aluminum wheels-polished or mill finished
ABS 4S-2M
Paint-color-contact RSM
Third axle flip
Spreader bar for 14’ spread
Lift axle at rear
Lugs, air & electrical at rear
Air lock pin at deck
Removable boards for brackets
Front bolster welded or removable-bolt on
Parking brakes
Spare tire and wheel
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
