The Northwest style truck and pull combination allows for increased mobility in tight areas while adding the ability to haul as much product as the local weight laws allow. This DOT-406 combination can get in and out of the smallest gas station you can find. The bolster mounted truck tank is built with a front to rear pitch, while the pull trailer is built as a double taper. This popular combination is maneuverable and will drain completely and efficiently. The pull trailer can also be built with drain troughs and both units can be designed with numerous compartment configurations to help you get the job done.
Quality
Vessel Integrity – Craftsmanship – Certifications – Temperature Rating – Manufacturing Process
Performance
Service Life – Tare Weight – Unloading Options – Aerodynamics – Product Density Rating
Safety
Roll Stability & Brake System – Ergonomics – Training – Fall Protection – Bar Interlock
Value
Resale Value – Payload – Low Operating Costs – Technical Support – Aluminum Specific Design
Customer Support
Warranty – Dealer Support – Training – Product Literature – Industry Associations
Specifications:
Capacity: Up to 13,000 gallons shell full capacity, depending on your application.
Compartments: 2 to 6 with almost any possible configuration.
Bulkheads: Double bulkheads optional.
Manholes: 16" Civacon strongback style with a 10" fill and DOT-406 venting.
Vapor Collection Vent: Civacon #T196SV aluminum air operated inward opening sequential vents with stainless steel trim & Viton seats.
Vapor Recovery Lines: 4" aluminum internal vapor line through mid-tank to (2) flanged 4" vapor outlets, one on each unit.
Emergency Valve: Civacon "MaxAir" 5" x 4" Hi Flo, air operated, internal cylinder, with Tef-O-Sil seals.
Piping: 4" schedule #10 aluminum discharge piping with large radius formed sweeps to curbside of tank with Viton gaskets. Sight glasses, manifolds, pump lines, and cross-over lines are optional.
Discharge Valve: 4" Civacon 891A openable adapters with aluminum handle and Viton seals and 4" API to 4" cam style hose adapters and caps. Bottom loading Y pipes are also available.
Secondary Overfill Prevention: Civacon ROM II system. Overfill sockets with integral ground proving wires.
Brake Interlock: Individual interlocks at all loading heads and vapor recovery locations.
Pumps, Meters, Reels: Customer specified.
Ladder: Rear mounted on truck, front mounted on trailer. Aluminum construction with serrated rungs, platform top step and hand rails above overturn rails.
Walkway: Adhesive backed, skid-resistant tape between flashing rails. Expanded metal optional.
Cabinet: Heil built or vendor purchased aluminum cabinets. Heil cabinets have stainless steel hinges, water resistant seals and numerous shelving and lining configurations.
Draw Bar / Turntable: Silver Eagle Blue Poly, double bushed hinged assembly with hardened eye. Jost double roller turntable.
Hose Carrier: Customer specified hose tray or hose tube combinations.
Fenders: Smooth aluminum contour fenders with Heil anti sail/anti spray mud flaps front and rear.
Lights: 12V Truck-Lite or Peterson flange mount LED lamp system complying to FMVSS with conspicuity markings each side and rear.
Suspension: Hendrickson AA230 NT Intraax air ride tandem under turntable and at rear.
Axles: HP type spindles (parallel), 71.5” or 77.5” track, integral to suspension.
Brake System: Wabco 4S-3M ABS system. 16.5” x 7” drum brakes. Disk brakes are optional.
Suspension Frame: Aluminum suspension subframe at rear, high tensile steel dolly frame. Suspension is bolted to subframe with electrolysis barrier. Polished California style bumper overlay.
Oil Seals: Visible caps with OEM seals.
Hubs and Drums: 10 stud hub piloted aluminum hubs with factory preset bearing adjustment. Centrifuse outboard mount brake drums (16.5" x 7").
Paint: DuPont Imron 5000 series silver metallic polyurethane enamel paint on steel parts only.
Wheels: 10 stud hub piloted Alcoa LvL One aluminum disc wheels with clean buff finish.
Tires: Customer specified.
Warranty: Industry leading Silver 4 year limited warranty. Gold (5 yr) and Platinum (7 yr) packages are optional.
Options:
Hot-dip galvanized rungear components for harsh climates.
A full complement of polishing options.
A full line of safety options such as fall protection, collapsible railings, bicycle guards and unique lighting configurations.
Provisions for factory installed or customer installed pump kits available.
○ Customer Service ○ Warranty/Registration ○ Parts & Service
Market analytics
