Kalyn Siebert  Mechanical Removable Neck Trailer 

 





Note: All Kalyn Siebert trailers are engineered and custom built to meet the needs of each customer based on application, regional weight laws, severity of service, operational efficiency and personal preferences.  The specifications listed below should serve as a template for the end user to work with a Kalyn Siebert representative to develop specifications that suit a specific application.

Kalyn Siebert Platform Specification Template

MODEL: MRG-2-35T

1.    Capacity - 70,000 lbs distributed in 16’
    
2.    Overall nominal dimensions - 8’ 6” wide X 48’ length. Gooseneck 10’ 2 “, main deck 29‘2”, and rear deck 8’ 8"
    
3.    Load space, nominal - 29’ 2” for main deck
    
4.    Main deck height, loaded - 18” at rated capacity, 6” ground clearance, 24" unladen height
    
5.    Swing clearance - 81”
    
6.    Axles - Two axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb capacity
    
7.    Suspension - Ridewell Model 240 Air Ride, raise and lower valve in roadside bolster, 50” spread, no lift 
       provision as standard for any of the axles
    
8.    Brakes - 16½” X 7” Air
    
9.    Slack adjusters - Automatic slack adjusters; Parking brakes on rear axle only
    
10.  ABS - 2S/1M on rear axle
    
11.  Hubs - 10 stud, hub piloted, long studs, steel hub
    
12.  Drums - Cast drum
    
13.  Seals - Stemco, Oil
    
14.  Wheels - Steel disc wheels, 8.25 X 22.5
    
15.  Tires - OEM, 255/70R22.5, 16PR (Low Profile) radial tires
    
16.  Upper coupler - 49” king pin height 2” pin, 15” setting
    
17.  Cross members - On main deck 24” centers, 8" I beams
    
18.  Beams - Four 12” deep main beams (130,000 psi yield flanges and 80,000 psi yield web) and two side rails
    
19.  Floor - Main deck 1 5/16” Apitong, open in center, 1 1/8” on gooseneck, no wood on rear deck with floor
       screws every cross member
    
20.  Outriggers - 15 Clips only
    
21.  D-rings - 4 pair (bent) on siderail
    
22.  Ramps - Tapered with approximately 4 3/8“ drop to ground
    
23.  Tool tray - Expanded metal tool tray at front of main deck, approximately 6’ long
    
24.  Lugs - Optional
   
25.  Gooseneck - Full width
    
26.  Tie downs - Lightening square holes ™ in both main beams and side rail serve as tie downs. Gooseneck and
        rear deck have tie down holes on siderails only
    
27.  Lights & electrical - Sealed beam with mid turn signal, 12 volt with 7-way plug
    
28.  Mudflaps - Black anti-spray with Kalyn Siebert logo
    
29.  Finishing (Paint & trim) - Shot blasted prior to paint. Epoxy primer and black polyurethane paint. Air, electrical
      and hydraulic lines installed after painting is completed
    
30.  Conspicuity Tape - Discontinuous on sides
    
31.  Manual - One operator manual per order will be provided. Parts manual available as option
    
32.  Weight - 15,200 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional
       drawing will be provided by plant after order is received and accepted.
    
33) Camber  Lightest load  & heaviest loads: 
                                                   Weight
                                                   Dimensions
                                                   Location on trailer
                                                   Camber expectations




Next (Features & Benefits)>